03-08-2009 09:22 PM - edited 03-04-2019 03:51 AM
Hi Expert,
I have a problem when connecting to snmp mgmt server which all the parameters already in. The sh snmp shown below:
Need assistance on this. Thanks.
STCRR##sh snmp
Chassis: JABefe1LA
Contact: GG
Location: CRR
13704508 SNMP packets input
0 Bad SNMP version errors
353 Unknown community name
0 Illegal operation for community name supplied
66 Encoding errors
85347883 Number of requested variables
101 Number of altered variables
9684150 Get-request PDUs
4005295 Get-next PDUs
23 Set-request PDUs
15971374 SNMP packets output
54 Too big errors (Maximum packet size 1500)
327015 No such name errors
0 Bad values errors
0 General errors
13704089 Response PDUs
2267285 Trap PDUs
SNMP logging: enabled
Logging to 13.11.18.46.162, 0/10, 6796 sent, 0 dropped.
Logging to 130.2.9.108.162, 0/10, 6796 sent, 0 dropped.
Logging to 130.3.4.192.162, 0/10, 6796 sent, 0 dropped.
STCRR#
Thanks,
cindy
03-12-2009 07:50 PM
Any experts can help me on this?
thanks.
03-13-2009 12:58 AM
Hi,
If you are trying to connect to the mangement server. NMS on remote or local end ???
You do not need to configure the snmp...
Check the access to the server.
If the snmp server is not able to poll the agent then you need to check the snmp settings.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide