cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
420
Views
3
Helpful
1
Replies

SNMP-Temp Threshold

hclisschennai
Level 1
Level 1

Hi experts,

I want to know, "HOW TO CHANGE THE TEMPERATURE THRESHOLD VALUE" of the Router.

My understanding is using command "snmp-server enable trap envmon temperature", trap is sent when the temperature exceed certain value.

I like to know howb to modify or set this threshold value, so that the trap will be sent to the NMS server when threshold is reached.

For example, Trap should be sent to SNMP-Server when the temperature is reached to 50 Degree celsius

Thanks in advance

RB

1 Reply 1

Edison Ortiz
Hall of Fame
Hall of Fame

You can accomplish this task with RMON

http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_cfg_rmon_sup_ps6350_TSD_Products_Configuration_Guide_Chapter.html

But you need to find out the MIB that holds that information.

__

Edison.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: