Hi,
I am configuring 2811 routers for two site Site Aand site B. Site A router has two branches, with subnet 172.168.7.1/24 and 172.168. 22.1/24
site B router has Server network ie 172.168.11.1/24 connected to it. I have 2 lease line ie 256kbps and 2mbps between the outers
Requirement:
Branch A to Server should use 256 Mbps link
Brank B to Server should use 2Mbps link
Please see the attached document for the diagram.
256kbps and 2mbps links are up.
This is what i have configured in the routers
Router A:
Fa 0/0: 172.168.7.1/24
Fa 0/1: 172.168.22.1/24
S0/2: 192.168.99.1
S0/3: 192.168.98.1
IP route 172.168.11.0 0.0.0.0 192.168.98.2
IP route 172.168.11.0. 0.0.0.0 192.168.99.2
----------------------------------------------------
Router B
Fa 0/0: 172.168.11.1/24
S0/2: 192.168.99.2
S0/3: 192.168.98.2
IP route 172.168.7.0 0.0.0.0 192.168.99.1
IP route 172.168.22.0. 0.0.0.0 192.168.98.1
When I do a trace route to 172.168.11.1 (site A) from Router (site A) it takes 192.168. 99.1 or 192.168.98.1 route.
From site B it chooses the specific route as mentioned in ip route, so there's no problem.
How do i make source network 172.168.7.1/24 to take the 256kbps route and source network 172.168.22.1/24 take the 2mbps link when connecting to the 172.168.11.1/24 server network at site B ?
Thanks in advance .
