We are having 7600 with POS interaface to connect with an STM-4 link, we are planning to upgrade our link capacity to 1 Gig. Can we do so with our exsisting inventory or we need any other harware(WIC)?
NAME: "CLK-7600 1", DESCR: "OSR-7600 Clock FRU 1"
PID: CLK-7600 , VID: , SN: NWG122103KP
NAME: "CLK-7600 2", DESCR: "OSR-7600 Clock FRU 2"
PID: CLK-7600 , VID: , SN: NWG122103KP
NAME: "module 1", DESCR: "Cisco 7600 Series SPA Interface Processor-400 Rev. 2.5"
PID: 7600-SIP-400 , VID: V06, SN: JAE1225MM8M
NAME: "SPA subslot 1/0", DESCR: "1-port OC12/STM4 POS Shared Port Adapter"
PID: SPA-1XOC12-POS , VID: V01, SN: JAE1220I1XC
NAME: "subslot 1/0 transceiver 0", DESCR: "OC12 IR-1/STM4 S-4.1"
PID: 10-1969-01SFP , VID: A , SN: ECL1222055Y
NAME: "SPA subslot 1/1", DESCR: "2-port Gigabit Ethernet Shared Port Adapter"
PID: SPA-2X1GE-V2 , VID: V01, SN: JAE1228O8NT
NAME: "module 2", DESCR: "Cisco 7600 Series SPA Interface Processor-400 Rev. 2.5"
PID: 7600-SIP-400 , VID: V06, SN: JAE1226N373
NAME: "SPA subslot 2/0", DESCR: "2-port Gigabit Ethernet Shared Port Adapter"
PID: SPA-2X1GE-V2 , VID: V01, SN: JAE1229P1M4
NAME: "SPA subslot 2/1", DESCR: "2-port Gigabit Ethernet Shared Port Adapter"
PID: SPA-2X1GE-V2 , VID: V01, SN: JAE1229P1JV
NAME: "module 5", DESCR: "WS-SUP720-3B 2 ports Supervisor Engine 720 Rev. 5.6"
PID: WS-SUP720-3B , VID: V05, SN: JAF1222AETT
NAME: "msfc sub-module of 5", DESCR: "WS-SUP720 MSFC3 Daughterboard Rev. 3.1"
PID: WS-SUP720 , VID: , SN: JAF1222ATAD
NAME: "switching engine sub-module of 5", DESCR: "WS-F6K-PFC3B Policy Feature Card 3 Rev. 2.3"
PID: WS-F6K-PFC3B , VID: V01, SN: JAF1221BLAA
NAME: "module 6", DESCR: "WS-SUP720-3B 2 ports Supervisor Engine 720 Rev. 5.6"
PID: WS-SUP720-3B , VID: V05, SN: JAF1222AFCC
NAME: "msfc sub-module of 6", DESCR: "WS-SUP720 MSFC3 Daughterboard Rev. 3.1"
PID: WS-SUP720 , VID: , SN: JAF1222ASQL
NAME: "switching engine sub-module of 6", DESCR: "WS-F6K-PFC3B Policy Feature Card 3 Rev. 2.3"
PID: WS-F6K-PFC3B , VID: V01, SN: JAF1222ATKA
NAME: "FAN-MOD-6SHS 1", DESCR: "High Speed Fan Module for CISCO7606-S 1"
PID: FAN-MOD-6SHS , VID: V01, SN: DCH12231414
NAME: "PS 1 PWR-2700-AC", DESCR: "AC power supply, 2700 watt 1"
PID: PWR-2700-AC , VID: V02, SN: APQ12020011
NAME: "PS 2 PWR-2700-AC", DESCR: "AC power supply, 2700 watt 2"
PID: PWR-2700-AC , VID: V02, SN: APS1221017H
