Hi,
I have the problem to remove the deleted file from flash, Any idea?
R3#sh flash
System flash directory:
File Length Name/status
1 15528164 c3620-is3x-mz.123-15.bin
2 890 r3-confg [deleted]
3 1241 r3-confg
[15530492 bytes used, 1246720 available, 16777212 total]
16384K bytes of processor board System flash (Read/Write)
R3#squeeze flash
Squeeze operation may take a while. Continue? [confirm]
First create squeeze log by erasing the entire device
%Error squeezing flash (Missing or corrupted log)
R3#
R3#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3620-IS3X-M), Version 12.3(15), RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Wed 25-May-05 01:38 by ssearch
Image text-base: 0x60008B00, data-base: 0x618CC000
ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
ROM: 3600 Software (C3620-IS3X-M), Version 12.3(15), RELEASE SOFTWARE (fc3)
R3 uptime is 19 hours, 34 minutes
System returned to ROM by power-on
System image file is "flash:c3620-is3x-mz.123-15.bin"
cisco 3620 (R4700) processor (revision 0x81) with 61440K/4096K bytes of memory.
Processor board ID 15069834
R4700 CPU at 80MHz, Implementation 33, Rev 1.0
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
2 Ethernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
1 ISDN Basic Rate interface(s)
DRAM configuration is 32 bits wide with parity enabled.
29K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
R3#
