We already configured logging. but while show logging command or monitor . its now showing any log message.
OUTPUT: show logging
Syslog logging: enabled (0 messages dropped, 0 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)
No Active Message Discriminator.
No Inactive Message Discriminator.
Console logging: level debugging, 649124 messages logged, xml disabled,
Monitor logging: level debugging, 13046 messages logged, xml disabled,
Buffer logging: disabled, xml disabled,
Exception Logging: size (4096 bytes)
Count and timestamp logging messages: disabled
File logging: disabled
Persistent logging: disabled
No active filter modules.
Trap logging: level informational, 686598 message lines logged
Logging Source-Interface: VRF Name:
Suresh Babu K.C.
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
In no event shall Author be liable for any damages wha2tsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Just want to add a note, when you address what Leo points to, don't forget you might also want to adjust the default syslog buffer allocation. The default is rather small by today's available RAM standards.