cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
485
Views
0
Helpful
4
Replies

TACACS Problem

lneill
Level 1
Level 1

Hello. I am having a problem with two configuration lines when configuring TACACS. When I enter these two lines to my config it causes the line protocol on my router to go down. This router gets out via a T1 and we are using PPP. Let me know if I need to provide more details here are the two lines that are giving me problems. Thanks ahead of time for your help.

aaa accounting network default start-stop group tacacs+

aaa authorization network default group tacacs+ local

4 Replies 4

EPHRAIM MANI
Level 3
Level 3

Dear I,

can u please post ur full config. AFAIK these two lines shouldnt affect ur interface. We havt confirm what else command u entered in the interface with the PPP.

EM

Yep here you go...I don't see any reason why those two lines would cause a problem. I figured out awhile ago when all of a sudden our network was unable to get to the outside and I did a sh interface on the S0 interface and found that the line protocol was down. After trying everything and ruling out everything else but the config I tried an old config that didn't have these two lines and the line protcol went up. Ever since that day if I put in those two lines to the config the line protocol goes down.

LN

HI LN

Plese find the URL

http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/secur_r/sec_a1g.htm#wp1071720

I m in hurry just go thru this url i will get back to later.

HI LN

Plese find the URL

http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/secur_r/sec_a1g.htm#wp1071720

I m in hurry just go thru this url i will get back to u later.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: