Hi All,
Please advise on the below. I checked and RST-ACK is like FIN-ACK to close the connection..
Question:
1)Without the (Fin-ACK) from 10.1.1.2, can 10.1.1.1 send (RST-ACK)?
2)If the above is yes, should 10.1.1.2 send (FIN-ACK) after (RST-ACK)?
Say the TCP session is between 10.1.1.1 and 10.1.1.2
10.1.1.1---->syn 10.1.1.2
10.1.1.2---->syn-ack 10.1.1.1
10.1.1.1---->ack 10.1.1.2
------Omittied the data transfer-------
10.1.1.1 -->RST,ACk 10.1.1.2
Thanks