10-19-2011 03:36 AM - edited 03-04-2019 01:59 PM
Hi People!
I've got Cisco 7609 with WS-X6708-10GE (8x10Ge)
And one port (te9/4) from it have zero bit rate counters, but all the rest of it are very good.
BTW: I can see traffic if read it by SNMP.
CUT
-----------------------------
sh int te9/4
TenGigabitEthernet9/4 is up, line protocol is up (connected)
Hardware is C6k 10000Mb 802.3, address is 001b.0de5.2980 (bia 001b.0de5.2980)
Description:
Internet address is x.x.x.x/30
MTU 9216 bytes, BW 10000000 Kbit/sec, DLY 10 usec,
reliability 255/255, txload 0/255, rxload 0/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 10Gb/s
Transport mode LAN (10GBASE-R, 10.3125Gb/s)
input flow-control is off, output flow-control is off
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters 05:04:34
Input queue: 0/75/13/13 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
30 second input rate 0 bits/sec, 0 packets/sec
30 second output rate 0 bits/sec, 0 packets/sec
L2 Switched: ucast: 45807 pkt, 5510959 bytes - mcast: 6277 pkt, 493842 bytes
L3 in Switched: ucast: 4181386438 pkt, 3075459119773 bytes - mcast: 0 pkt, 0 bytes mcast
L3 out Switched: ucast: 4171812456 pkt, 3461584748808 bytes mcast: 0 pkt, 0 bytes
4180503416 packets input, 3074832305731 bytes, 0 no buffer
Received 6274 broadcasts (0 IP multicasts)
0 runts, 885 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
4170654636 packets output, 3464391999669 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out
CUT2
-----------------------------------------------------
sh int te9/6
TenGigabitEthernet9/6 is up, line protocol is up (connected)
Hardware is C6k 10000Mb 802.3, address is 001b.0de5.2980 (bia 001b.0de5.2980)
Description: LIP-Te6/5
Internet address is x.x.x.x/30
MTU 9216 bytes, BW 10000000 Kbit/sec, DLY 10 usec,
reliability 255/255, txload 101/255, rxload 124/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 10Gb/s
Transport mode LAN (10GBASE-R, 10.3125Gb/s)
input flow-control is off, output flow-control is off
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/29494/26946 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 4867340000 bits/sec, 752425 packets/sec
5 minute output rate 3991572000 bits/sec, 629062 packets/sec
L2 Switched: ucast: 8288830 pkt, 687208565 bytes - mcast: 1021125 pkt, 80453420 bytes
L3 in Switched: ucast: 338785153739 pkt, 239737259157798 bytes - mcast: 0 pkt, 0 bytes mcast
L3 out Switched: ucast: 509158770601 pkt, 429164728667687 bytes mcast: 0 pkt, 0 bytes
338783357015 packets input, 239728195542054 bytes, 0 no buffer
Received 1021128 broadcasts (0 IP multicasts)
0 runts, 3565918579 giants, 6 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
509105316251 packets output, 435452912251165 bytes, 0 underruns
0 output errors, 0 collisions, 2 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out
10-19-2011 10:26 PM
Hi Oleg!
You can change IOS. It's may be Cisco-bug
AFAIK you have to throw Cisco out of the window and buy something true.
It's may be Juniper or Force10 for example.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide