cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
466
Views
30
Helpful
16
Replies
Highlighted
Beginner

The repeat log...

Hello all,

I have Cisco router 1921.

I configured like below. 

conf t

boot system flash [IOS name]

reload

Whenever I power on after upper command, continuously came up like below commands...

What was worse, I cannot enter rommon mode even though I input "Pause Break"..

How can I deal with this problem?

Please tell me advice.

Regards,

SK.

[The log when power on]

Smart Init is enabled
smart init is sizing iomem
TYPE MEMORY_REQ
Onboard devices &
buffer pools 0x01E8F000
-----------------------------------------------
TOTAL: 0x01E8F000

Rounded IOMEM up to: 32Mb.
Using 6 percent iomem. [32Mb/512Mb]

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.


%SYS-6-READ_BOOTFILE_FAIL: tftp://255.255.255.255/flash:c1841-advipservicesk9-mz.124-17.bin No usable interfaces.

%SYS-6-READ_BOOTFILE_FAIL: tftp://255.255.255.255/c1841-advipservicesk9-mz.124-17.bin No usable interfaces.

%SYS-6-READ_BOOTFILE_FAIL: tftp://255.255.255.255/WORD No usable interfaces.

System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2012 by cisco Systems, Inc.

Total memory size = 512 MB
CISCO1921/K9 platform with 524288 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC disabled


Readonly ROMMON initialized
program load complete, entry point: 0x80903000, size: 0x4c4a0
open(): Open Error = -13
loadprog: error - on file open
boot: cannot load "flash:c1841-advipservicesk9-mz.124-17.bin"

System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2012 by cisco Systems, Inc.

Total memory size = 512 MB
CISCO1921/K9 platform with 524288 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC disabled


Readonly ROMMON initialized
program load complete, entry point: 0x80903000, size: 0x4c4a0
program load complete, entry point: 0x80903000, size: 0x4c4a0


IOS Image Load Test
___________________
Digitally Signed Release Software
program load complete, entry point: 0x81000000, size: 0x403d020
Self decompressing the image : ################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################## [OK]

16 REPLIES 16
Highlighted

do you have access to cli once the router reboots?

if yes, check if the following command is present in the configuration

no service password-recovery to remove the command use

service password-recovery

if not you are not using the break sequence correctly to gain access to ROMMON mode.

Highlighted

I cannot enter CLI and Rommon mode..

The log I posted was continuously came up...

What should I do ㅠ_ㅠ