So, I have a mixed vendor network with a bunch of 3560s as my core, and a different vendor for the remote locations.
When I attempt to ping one of the objects at a remote location it works as expected, however traceroute produces the following result. There is connectivity so I'm trying to understand why it works this way.
(I already checked the other posts about ping, and yes I know it works over UDP, and there's no firewalls in place here, so I struck out early googling)
Is there a different tool besides traceroute that works in a switched environment?
Output from results:
Main#ping 10.1.15.195 (Random hardware)
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.15.195, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/3/8 ms
Main#trace 10.1.15.195
Type escape sequence to abort.
Tracing the route to 10.1.15.195
1 * * *
2 * * *
3 * * *
4 * * *
5 * * *
6 * * *
7 * * *
8 * * *
9 * * *
10 * * *
11 * * *
12 * * *
13 * * *
14 * * *
15 * * *
16 * * *
17 * * *
18 * * *
19 * * *
20 * * *
21 * * *
22 * * *
23 * * *
24 * * *
25 * * *
26 * * *
27 * * *
28 * * *
29 * * *
30 * * *
