Tracker PID v04 Fnd Perpetual ISR4400S - no delivery
Hi everyone!!! The customer had a question, what does the position with the p/n C1F1VISR4400S-04 mean? In the description - "Tracker PID v04 Fnd Perpetual ISR4400S - no delivery", and I can not find a normal description on cisco.com ... Can anyone help ???
Re: Tracker PID v04 Fnd Perpetual ISR4400S - no delivery
The line item appears to refer to the Cisco ONE Software program that governs software purchasing and upgrades.
Specifically, the item appears to fall under the Cisco ONE perpetual model outlined in this At A Glance brochure, and speaks to base functions in the device.
Cisco ONE for Access (switching and wireless), WAN, and Data Center are available through the perpetual model. The software is organized by domain (access, WAN, and data center) and product type: Foundation for base functions and Advanced for more complex customer use cases (Figure 2).
I didn't find the exact part number you mention, but this page provides some additional information on Cisco ONE for WAN part numbers along with purchase guidance.
I have Cisco 2960 switch & I am going to use MST for spanning tree Below is the configuration spanning-tree mst configuration name TEST-MST revision 1 instance 1 vlan 101 instance 1 vlan 102 I have 2 VLANS & I wa...
We are having issues with a WS-C2960X-48FPD-L running IOS 15.2(2)E7. Some ports are simply not working. We had POE issues on some of the ports and decided to upgrade to hopefully resolve those issues but this has now become an even bigger issu...
the scenario is :I'm replacing core Cisco switch 4506-E with switch 4507R-E. As I have one supervisor card on 4506-E and I'm going to take out all the card that I have in 4506-E and install it in the new 4507R-E. On the 4507R-E I have 2 slots for the supe...
Since its release in August of 2019, the SASE report released by Gartner has generated a lot of chatter regarding what SASE is all about. People are wondering whether it will be disruptive to the current network and network security designs and are curiou...
I tried to setup a virtual environment with 2960 switches and 2911 Router. In one part of the network where I connected PCs directly to the 2911 Router, I was able to communicate to the attached devices, having configured static route. In the th...