cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1218
Views
2
Helpful
0
Replies
Highlighted
Beginner

Two Next Hops - PBR - Load Balancing

I was wondering if anyone knew if you had two next hops in a route-map, in two different subnets and they were equal cost if they will do load balancing or are is it going to just use the first "next-hop" address? (See sample configuration below) I want them to load balance or load share on two different links, but didn't how to do this in the PBR configurations. I read something about "recursive" next-hop, but didn't know if that would do load balancing or not.

Thanks,

Martin

access-list 75 permit 10.100.0.0 0.0.255.255

route-map This-Way permit 10

match ip address 75

set ip next-hop 10.255.5.116

set ip next-hop 10.255.5.124

set ip next-hop verify-availability

0 REPLIES 0