cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
434
Views
0
Helpful
4
Replies
majed.balsharaf
Beginner

Two Routers Connectivity in LAN

I am having two routers of 1841 series.In router 1 I am connected with my Cloud Network and in router 2 I am connected for internet.

I need both the wan connectivities to be advertise in my network for my LAN which is configured with DHCP in my ROUTER 1

Now should I connect this both routers in one switch but I'm having 2960 switch :-(

any suggestions,what should I configure Policy base routing or static route.

Router 1

int f0/0

ip add 10.x.x.x 255.255.255.0

description "Connected to LAN"

int f0/1

ip add 172.x.x.14 255.255.255.252

description "Connected to Cloud"

ip dhcp pool LAN

network 10.x.x.0 255.255.255.0

default-router 10.x.x.254

Router 2

int f0/0

ip add 62.x.x.81 255.255.255.252

Please suggest

Thanks.

2 ACCEPTED SOLUTIONS

Accepted Solutions
Jeff Van Houten
Contributor

Put a LAN address on the remaining interface on router 2, then put a default route on router 1 pointing to router 2s LAN address.

Sent from Cisco Technical Support iPad App

View solution in original post

cashqoo
Beginner

just a suggestion. assuming that the majority of the traffic are internet bound.

hope it helps.

View solution in original post

4 REPLIES 4
Jeff Van Houten
Contributor

Put a LAN address on the remaining interface on router 2, then put a default route on router 1 pointing to router 2s LAN address.

Sent from Cisco Technical Support iPad App

View solution in original post

Thanks,

I  will implement and reply you back

cashqoo
Beginner

just a suggestion. assuming that the majority of the traffic are internet bound.

hope it helps.

View solution in original post

Thanks,

I  will implement and reply you back