cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
476
Views
5
Helpful
14
Replies

Unable to Connect two E-BGP Peers using IBGP Peers

nishprit
Level 1
Level 1

Hi I am a newbee to BGP. I have created a setup of IBGP and EBGP network a explained in the below attachments. Configuration also shared in the attachments on Router 1, 3, 4 and 6. Router 1 is able to learn Network 6.6.6.0 advertised by Router 6. Same is the case with Router 6 which is also learning Network 1.1.1.0 advertised by Router1. However when I am trying to ping 6.6.6.6 from Router 1 it is showing below output:

R1#ping 6.6.6.6

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 6.6.6.6, timeout is 2 seconds:
UUUUU
Success rate is 0 percent (0/5)

 

Same is the case when I am trying to ping 1.1.1.1 from Router 6.

Please let me know how to recetify this problem.

 

1 Accepted Solution

Accepted Solutions