02-08-2019 07:19 AM - edited 03-05-2019 11:15 AM
Hi All,
I tried setting cisco 4300 router on a Gig line from ISP and then LAN ports are set to Gig but i am getting 90 Mbs top speed.
If i run test from the ISP router on my laptop with the same Public IPs i am getting 900Mbps + speeds and if i apply the same IPs to g0/0/0 port of 4300 router and then connect my Gig switch 2960 to G 0/0/1 (LAN) and run speed test i am get 90Mbps. I tried connecting my laptop directly to the router and i am still hardly getting100Mbps.
Router is configured with all standard configuration.
IP interface Gig 0/0/0 (Wan) Public IP
IP NAT outside
IP interface Gig 0/0/1 (LAN) Private IP
Ip NAT inside
Ip Dhcp excluded-address [Block of IP]
IP DHCP pool LAN
Network [LAN addres]
default-router [LAN gateway]
DNS server 8.8.8.8
access-list 1 permit [LAN] 0.0.0.255
IP NAT inside source list 1 interface Gig 0/0/0
IP route 0.0.0.0 0.0.0.0 (WAN gateway)
These are the only commands that were configured.
Could you please let me know if i am missing any command to allow Gig traffic .
Thanks
Kind Regards
C
Solved! Go to Solution.
02-08-2019 08:26 AM
ASR 4K depends on license you bought it is caped for that capacity.
If you looking WAN Through put you read me last email how can you and limitation and i have suggested models for higher throughput.
Since we are not sure what is the device role how your network, so too mature to suggest here L3 Switch or another device here.
02-08-2019 07:22 AM - edited 02-08-2019 07:23 AM
Can you post show version and sh platform hardware throughput level, what Licenses you have to look.
02-08-2019 07:38 AM
Hi BB
Please find below version details:
Router#show version
Cisco IOS XE Software, Version 16.03.07
Cisco IOS Software [Denali], ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.3.7, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Sat 04-Aug-18 00:44 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2018 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
Router uptime is 3 minutes
Uptime for this control processor is 5 minutes
System returned to ROM by PowerOn at 13:54:47 UTC Fri Feb 8 2019
System image file is "bootflash:isr4300-universalk9.16.03.07.SPA.bin"
Last reload reason: PowerOn
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Suite License Information for Module:'esg'
--------------------------------------------------------------------------------
Suite Suite Current Type Suite Next reboot
--------------------------------------------------------------------------------
FoundationSuiteK9 None None None
securityk9
appxk9
AdvUCSuiteK9 None None None
uck9
cme-srst
cube
Technology Package License Information:
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
appxk9 None None None
uck9 None None None
securityk9 securityk9 Permanent securityk9
ipbase ipbasek9 Permanent ipbasek9
cisco ISR4331/K9 (1RU) processor with 1650780K/6147K bytes of memory.
Processor board ID FLM2041W0GP
3 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
3223551K bytes of flash memory at bootflash:.
0K bytes of at webui:.
Configuration register is 0x2102
Thanks
02-08-2019 07:40 AM
02-08-2019 07:46 AM
That is 100MB only.
02-08-2019 07:48 AM
02-08-2019 07:53 AM
02-08-2019 07:50 AM - edited 02-08-2019 07:51 AM
Enable temporary throughput license on the router. It will be available for next 60 days. Don’t forget to save your configuration and reload the chassis to take effect.
ISR(config)#platform hardware throughput level 300000
Note : 4331 max support 300MB.
you need 4431 or 4451 for 1GB / 2GB.
02-08-2019 07:59 AM
02-08-2019 08:01 AM
Yes that is standard, everything you need to buy based on requirement.
02-08-2019 08:14 AM
02-08-2019 08:26 AM
ASR 4K depends on license you bought it is caped for that capacity.
If you looking WAN Through put you read me last email how can you and limitation and i have suggested models for higher throughput.
Since we are not sure what is the device role how your network, so too mature to suggest here L3 Switch or another device here.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide