cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
1370
Views
5
Helpful
1
Replies
nhuan022354
Beginner

upgrade the 6509/6513 dual SUP720/MSFC3 Cisco IOS

Hello,

My task is to upgrade the IOS to 12.2(18)SXF4 size 75MB.

1. Do we have to upgrade both the SUP720 and the MSFC flash SEPERATELY with new IOS?

Please advise.

--------------------------------

D000RTR01#sho mod

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

1 24 CEF720 24 port 1000mb SFP WS-X6724-SFP SAD083700XX

5 2 Supervisor Engine 720 (Active) WS-SUP720-BASE SAD0834001U

6 2 Supervisor Engine 720 (Warm) WS-SUP720-BASE SAD0834088X

Mod MAC addresses Hw Fw Sw Status

--- ---------------------------------- ------ ------------ ------------ -------

1 0011.bb6b.1398 to 0011.bb6b.13af 2.1 12.2(14r)S5 12.2(18)SXD6 Ok

5 000f.f7be.cf7c to 000f.f7be.cf7f 3.1 7.7(1) 12.2(18)SXD6 Ok

6 000f.f7be.ceb8 to 000f.f7be.cebb 3.1 7.7(1) 12.2(18)SXD6 Ok

Mod Sub-Module Model Serial Hw Status

--- --------------------------- ------------------ ------------ ------- -------

1 Centralized Forwarding Card WS-F6700-CFC SAD082807PY 2.0 Ok

5 Policy Feature Card 3 WS-F6K-PFC3A SAD082500V3 2.3 Ok

5 MSFC3 Daughterboard WS-SUP720 SAD08300FKE 2.2 Ok

6 Policy Feature Card 3 WS-F6K-PFC3A SAD082604A4 2.3 Ok

6 MSFC3 Daughterboard WS-SUP720 SAD08300FHD 2.2 Ok

Mod Online Diag Status

--- -------------------

1 Pass

5 Pass

6 Pass

D000RTR01#sho mod ver

Mod Port Model Serial # Versions

--- ---- ------------------ ----------- --------------------------------------

1 24 WS-X6724-SFP SAD083700XX Hw : 2.1

Fw : 12.2(14r)S5

Sw : 12.2(18)SXD6

Sw1: 8.4(0.61)RCC9

WS-F6700-CFC SAD082807PY Hw : 2.0

5 2 WS-SUP720-BASE SAD0834001U Hw : 3.1

Fw : 7.7(1)

Sw : 12.2(18)SXD6

Sw1: 8.4(0.61)RCC9

WS-SUP720 SAD08300FKE Hw : 2.2

Fw : 12.2(14r)S9

Sw : 12.2(18)SXD6

WS-F6K-PFC3A SAD082500V3 Hw : 2.3

6 2 WS-SUP720-BASE SAD0834088X Hw : 3.1

Fw : 7.7(1)

Sw : 12.2(18)SXD6

Sw1: 8.4(0.61)RCC9

WS-SUP720 SAD08300FHD Hw : 2.2

Fw : 12.2(14r)S9

Sw : 12.2(18)SXD6

WS-F6K-PFC3A SAD082604A4 Hw : 2.3

D000RTR01#

D000RTR01#sho ver

Cisco Internetwork Operating System Software

IOS (tm) s72033_rp Software (s72033_rp-PSV-M), Version 12.2(18)SXD6, RELEASE SOF

TWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2005 by cisco Systems, Inc.

Compiled Wed 17-Aug-05 17:34 by evmiller

Image text-base: 0x4002100C, data-base: 0x42040000

ROM: System Bootstrap, Version 12.2(14r)S9, RELEASE SOFTWARE (fc1)

BOOTLDR: s72033_rp Software (s72033_rp-PSV-M), Version 12.2(18)SXD6, RELEASE SOF

TWARE (fc1)

---

65536K bytes of Flash internal SIMM (Sector size 512K).

Configuration register is 0x2102

D000RTR01#

1 REPLY 1
Mark Pareja
Beginner

No,

You assumning your running native IOS, you should be able to load the image on SUP-A and SUP-B change the bootparameter to reflect the new image name.

Then force a failover, Insure that SUP-A boots normaly then force a second failover to upgrade SUP-B.

This is assuming your running redundancy mode.

Hope that helps