cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
192
Views
0
Helpful
0
Replies
Highlighted
Participant

upgrading CISCO NCS 5501-SE

Hello,

 

We're getting Cisco NCS-5501-SE 7.0.0 from Cisco. Before we use it in production I will update it to 7.0.2.

Looking at update guide the main steps are here:

 

router(config)#fpd auto-upgrade enable
router(config)#commit

install add source harddisk:/ 702.tar
install prepare id xxx
install activate
install commit

Following this guide i would install all packages. But as we know IOS-XR is modular system and I dont need all packages running and updated (for example MPLS)

 

I need just OSPF, Security (SSH) and Management packages with ofcourse mini package which is mandatory.

 

So, in which step i will need to choose the actual packages ? Because command :  install add source harddisk:/ 702.tar

would prepare all packages for installation, yes ?

As I understand under command [install activate] i will be able to chose actual packages i want to upgrade ant activate ?

Thanks

 

P.S sorry, could this thread be moved to IOS-XR subforum ? Thanks

 

0 REPLIES 0