cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Popup Hotspot Using ISR 1000 with WiFi/LTE for Teleworkers and Micro Branchesr
121
Views
0
Helpful
0
Replies
Highlighted
Beginner

Upgrading LTE modem on 4331

Hello,

 

I am not able to figure out how to get this command to work on the router.  I have done this upgrade on 809, and IR1101 but this is the first time doing it on a 4431 (version 16.4.2).  I have the new modem firmware in the new2kmtu folder.  I keep getting invalid input detected at the M of modem-provision.  Anyone know how to make this microcode upgrade work?

 

Router#microcode reload cellular 1 1 modem-provision flash:new2kmtu
                                                         ^
% Invalid input detected at '^' marker.

Router#microcode reload cellular 0 1 modem-provision flash:new2kmtu
                                                         ^
% Invalid input detected at '^' marker.

 

controller Cellular 1/0/0

 

Router#show cellular 1/0/1 hardware
Modem Firmware Version = SWI9X15C_05.05.58.00
Modem Firmware built = 2015/03/04 21:30:23
Hardware Version = 1.0
Device Model ID: MC7354
Package Identifier ID: 1102037_9903214_MC7354_05.05.58.00_00_Cisco_005.009_000
International Mobile Subscriber Identity (IMSI) = qqqqqqqqqqqqqq
International Mobile Equipment Identity (IMEI) = aaaaaaaaaaaa
Integrated Circuit Card ID (ICCID) = zzzzzzzzzzzzz
Mobile Subscriber Integrated Services
Digital Network-Number (MSISDN) =
Modem Status = Modem Online
Current Modem Temperature = 33 deg C
PRI SKU ID = 1102037, PRI version = 05.09, Carrier = AT&T