cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3446
Views
0
Helpful
2
Replies
Beginner

V.35 on 2911 router

I need a interface v.35 on 2911 router, but it does not have WIC slot, it has EHWIC. Could some one told me if there are a card with V.35 interface that I can install in this model of router?

Thanks in advance

Everyone's tags (3)
2 REPLIES 2
Highlighted
VIP Expert

Re: V.35 on 2911 router

The 2911 uses a HWIC T1/Serial card.  They new ones are call "Cisco Smart Serial connector"  It is 26 Pin type connector, and it supports up to 8Mb.

Have a look at this link for more details:

http://www.cisco.com/en/US/docs/routers/access/hardware/notes/marcabl.html#wp40244

HTH

Reza

Highlighted
Cisco Employee

Re: V.35 on 2911 router

You just need an Serial WIC card

LIke

http://www.cisco.com/en/US/docs/routers/access/interfaces/ic/hardware/installation/guide/ser_hwic.html#wp1040370

and then the appropriate matched cable to attach to V.35.

Cisco makes a universial serial interface in a large (60 pin) or small (26 pin) format, which saves real estate on the hardware, and then the cable converts it to the appropriate connector.

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here