VLANS,EIGRP and DHCP

[Bunny12375]

Guys I need help configuring the eigrp I can't seem to get it working here's what Ive done so far....

1) subnet appropriately

2) Configure EIGRP

3) Configure DHCP

[Martin L · Accepted solution]

in addition to advertise its own networks and share routes, routers must share subnet, network, aka be on the same network. you are not doing it; and missing one network under eigrp.

Also, you have eigrp auto-summary which may cause problems down the road. IOS 12.x has auto summary by default; IOS 15 has not.

Regards, ML
**Please Rate All Helpful Responses **

[Georg Pauwen · Accepted solution]

Hello,

the serial interfaces need to be on the same subnet. I configured both routers as DHCP servers for their respective LAN subnets.

Attached the revised file...(saved in PT version 8).