VRF Aware NAT route leaking cisco ios

[georgehewittuk1]

Hi,

I know with Cisco IOS-XE there is the VASI configurations but with Cisco IOS what options do we have to leak traffic between VRFs on same router and NAT?

I'm aware of implementing a global static route into a VRF and NAT but for inter-vrf would it need to be achieved through an export map or another configuration example I'm missing?

Thanks all

George

[Georg Pauwen]

Hello,

not sure if that is what you are after, but have a look at the link below:

https://community.cisco.com/t5/security-documents/nat-with-vrf-ios-vs-ios-xe/ta-p/3156555

[Deepak Kumar]

Hi,

yes, you will require import and export command to archive the same.

Here is an example: https://www.cisco.com/c/en/us/support/docs/ip/ip-routing/200158-Configure-Route-Leaking-between-Global-a.html

[paul driver]

Hello

---

@georgehewittuk1 wrote:

I'm aware of implementing a global static route into a VRF and NAT but for inter-vrf would it need to be achieved through an export map or another configuration example I'm missing?

---

Are these separate vrf/s both internally to you network? - can you share a topology diagram of your intentions and preferably attach a file with the current configuration of the NAT/VRF rtr(s)