Currently I have setup one pair of Cat6 with VSS enabled. And this VSS is connected to 2 core routers with MEC, which means each Ca6 has 2 links to the 2 core routers respectively. BGP is the routing protocol that been used between them and graceful restarts is enabled on all the peers.
Epagp is used for dual active detection, however when I shut down all of the VSL links, and do continuous ping from inside network to outside network, there is more than 10 ping drops occured, is there any workaround to tune the BGP timing, or something else can help to reduce the ping drop?
And based on my understand, with MEC, there should only be very minimum drops.
IntroductionCisco DNA Center Deployment StepsISE Deployment Steps
Host Onboarding is the term used when connecting an endpoint (hosts , IOT , Other devices) to the fabric , and can be accomplished in a couple of ways.One option is the "static...
good morning I have this report from users, saying that they encounter connection issue only when they are wired , but the wireless I fine. both connection are using the same path to the internet ...please advised a troubleshooting plan.
Enterprise Switching Business Unit is glad to announce Beta release 16.12.3 for all Catalyst 9200/9300/9400/9500/9600. This release is made available to allow users to test, evaluate and share feedback before General Avail...
Hello.I make tools for gt CDP/LLDP data? VLANs/SVI and connected hosts (MAC/IP/Vendor).Work rfom windows.Can be exported to xml/json filedownload from: http://www.powerc.ru/download/PowerTOOLS.msi (for Windows).If You have questions please contact wi...