04-19-2011 03:15 AM - edited 03-04-2019 12:06 PM
Hi all,
we have a network as mentioned below
1. Router 1841- IOS 12.4 (25)
There are two WAN connection we have . One is 2Mbps and another one is 4Mbps. And one Internal network ie 10.0.0.0 /24
In this 10.0.0.x and 10.0.0.y are using for Video confference. Remaining all are for users .
I want these two to communicate always with my 2 mbps line and if they are not in use i need total of 6mbps (4 + 2 mbps ) connection for my useres Cisco 1841 Router . How can i achive this ? Please help .....
Regards
Sivapraksh.M
04-19-2011 04:28 AM
Look into glbp gateway load balancing protocol. This can be used for outbound balancing. I use the term balancing loosely. For inbound depends on the wan protocol
Sent from Cisco Technical Support iPhone App
04-19-2011 04:29 AM
Sorry assumed two routers.
Sent from Cisco Technical Support iPhone App
04-19-2011 05:41 AM
Hello,
can you give me the destination ips , i.e when i take a example 10.10.10.1/24 and 10.10.10.2/24 are the ips on your LAN that are trying to communicate to some ip for video communication and other ips in the SUBNET that the users are trying to access. it becomes very easy to do this when you have the destination ips
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide