07-10-2011 08:26 PM - edited 03-04-2019 12:56 PM
Hi,
Am trying to find out what is the suitable SPA for ASR1000 routers to connect ATM DS3 through the local telco. Currently this is connected to a NM-ATM-DS3 module on a C3845 router. The reason for asking is we need to upgrade the WAN router to ASR1000. Hope someone can help.
Thanks.
Chang W K
Solved! Go to Solution.
07-11-2011 01:32 AM
Hello Chang,
no ATM DS3 SPA is listed for ASR 1000
I'm sorry to give you bad news
or you upgrade the access circuit to OC-3 or you cannot connect the ATM line to the ASR 1000, or you would need an external ATM switch to perform speed adaptation
Hope to help
Giuseppe
07-11-2011 01:32 AM
Hello Chang,
no ATM DS3 SPA is listed for ASR 1000
I'm sorry to give you bad news
or you upgrade the access circuit to OC-3 or you cannot connect the ATM line to the ASR 1000, or you would need an external ATM switch to perform speed adaptation
Hope to help
Giuseppe
07-11-2011 07:59 PM
Hi Giuseppe,
That was my conclusion as well after browsing the Cisco docs for half a day. Just wanted confirmation in case I missed something.
Thanks for your advice.
Cheers
Chang W K
08-22-2013 01:18 PM
Looks like this should work.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide