07-23-2012 06:07 AM - edited 03-04-2019 05:02 PM
Hi dears.
i installed new WS-X6516A on 6500 series switch. the module front panel led is off and the status is power down.
how i troubshouting this module? is this physical problem? or must I write any command to active the module?
please help me.
thank you advice.
07-23-2012 07:51 AM
Hello Teymur,
check
show environment
show environment power
or show power
to see if there is available power to power on the module
Hope to help
Giuseppe
07-23-2012 09:43 PM
Dear Giuseppe
. i did show command and there have a power. what i check next?
07-23-2012 10:42 PM
i installed new WS-X6516A on 6500 series switch. the module front panel led is off and the status is power down.
Did you ENABLE the power to the module? Command: power enable module
Can you please post the output to the command "sh log"?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide