Hello!
I have to configure a generic x25 rbp map, how I can do that?
I try this:
x25 map rbp 0 cud 0x00550055 remote host 10.0.0.1 port 3000
But when I use '0' in DTE source, I have this on debug log:
Feb 9 17:17:36.866: Serial0/0/0: X.25 I R1 Call (17) 8 lci 1
Feb 9 17:17:36.866: From (8): XXXXXXX To (0):
Feb 9 17:17:36.866: Facilities: (0)
Feb 9 17:17:36.866: Call User Data (8): 0x5555555 (unknown)
Feb 9 17:17:36.870: Serial0/0/0: X.25 O R1 Clear (5) 8 lci 1
Feb 9 17:17:36.870: Cause 0, Diag 64 (DTE originated/Call or Clear problem)
Thanks for your help!!