do above command disturb control plane of Vedge or Vmanage connectivity?
do above command disturb control plane of Vedge or Vmanage connectivity?
when do we use weight command in Viptela SDWAN mostly
If site A has Internet and MPLS link then site A will send traffic to site B by using ECMP principle right ?i.e. here site A will use ECMP in terms of IPSEC tunnel,Right?ECMP is by-default used in Viptela SDWAN right?
Preference for directing traffic to the tunnel. A higher value is preferred. When a vEdge routerhas multiple tunnels (that is, multiple TLOCs), only the TLOC or TLOCs with the highestpreference are chosen using inbound path selection. However, traffi...
control connections give OMP information to Vsmart ,does not it?if yes then if we put max-control-connections 0 for any TLOC then how would it share OMP information with Vmsart?Do we use this command in special scenario?
I need an article or a case study improve the capability of Cisco SD-WAN solution in compare to other vendors.
HI We like to setup SDW with viptela. we know viptela is setup at edge of branch office network. For vbond, vsmart and vmanager, where can we setup them? In data center? cloud or vendor? Anyone can share experience? Thank you
If you have 10 sites. 5 of them use DHCP address to get internet connectivity. 5 of them use static interface address. Would it be possible to have one template and have all 10 devices a member of that template with the configuration differences?
We've been looking for a way to sort of replicate the output of our IWAN monitoring of traffic classes to check which transport is currently being used and when previous switchovers between transports occurred and why. For example, in IWAN if you wa...
Folks: Fortigate can be used as vEdge and viptela as well. Anyone can compare the two kind of device. and relation with vSmart, vBond and vMamager? Thanks
Hi Anyone can tell what is difference between Viptela and SDWAN Fortigate? Can we say if we use Viptela, we need to add another firewall?
Hi, I've been using the SD-Wan API and it worked with no problems. But, when I'm trying to do the logout I'm not able to get the code 302. I think it has to do with the random-number that appears in the code snippet. anyone knows what am I suppose to...
Kindly tell your insights about SD-WAN.
while doing troubleshooting ,There is service VPN 10 and VPN 0 is transport VPN at one site but when we try to reach other site which has VPN 10 also then we can ping with no packet drop through command--ping vpn 10 x.x.x.x as here traffic is going v...
Command i.e. used to check syslog in Vedge ,ISR,ASR in Viptela sdwan and how can we check syslog in Vmanage
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-05-2024 04:37 PM | ||
03-27-2024 03:04 AM | ||
03-19-2024 03:03 AM | ||
03-18-2024 10:00 AM | ||
03-14-2024 02:47 PM |
User | Count |
---|---|
9 | |
2 | |
1 | |
1 | |
1 |