We are doing a large SD-WAN deployment and we have created a device access policy only allowing SSH access from certain devices to the vty lines for all SD-WAN routers, all good. Question is how can this be achieved on vmanage/smart/bond. There looks...
Forum Posts
what would happen if vsmart goes down as vsmart has OMP peering with Vedges so would Vedge lose its connectivity due to this with other Vedges?
Hi, I have a few vEdges in the warehouse that i would like to update before sending them to the remote site, i would like to download the OS image in a USB flash drive and connect it via the USB port in each vEdge, is there a guide for doing this?. I...
Trying to generate CSR from vManage after installing root-ca. Getting error seen below. running 18.4.5 version. I have rebooted many times with no change. How can you wipe out all cert related stuff from vmanage and start over if no one has a fix?...
1.If We have 100 WAN edge devices on Vmanage Dashboard but we see 102 count on control status of Vmanage Dashboard.Please specify reason about seeing 2 extra count in control status of Vmanage Dashboard everytime as control status denotes control co...
HI ExpertsThere is currently a network renovation. We need to maintain the original network and deploy a new Cisco SDWAN network, and then allow the services on Azure to serve other branch sites through SDWAN.We need to install C8KV on Azure, but som...
Hello,Currently we're on DMVPN for our WAN and migrating to Cisco sd-wan as a replacement. Currently, all dmvpn sites reach the Internet from our data center, hence, the DC advertises a default route. At the current design, the sdwan has to be able t...
What is Root Certificate and ID_Certificate in Viptela SDWAN?
Customer has a hub and spoke Viptela network. Hub sites have 2 transports, mpls and lte. Customer wants to prefer the mpls color to egress out all traffic, unless the remote site only has an lte connection. If remote site only has an lte connection t...
Hi,I have below error when I tried to upgrade software of our vEdge1000 using CLI from 20.3.3 to 20.6.3.What is causing this error and how can I fix it? Thank you, vedge# request software install /home/admin/viptela-20.6.3-mips64.tar.gzgzip: invalid ...
Hello everyone,So my question is, I have 4 vbonds in my network, and they resolve by a FQDN so when a vedge comes up it will resolve the FQDN to 4 ip address and now I have 4 vbond ip addresses,so it will reach out to first one now if my first vbond...
Can the same service be deployed on multiple vEdges? i.e. can I add this to multiple vEdges that can reach 1.1.1.1 as a next-hop vpn 10 service FW address 1.1.1.1 is there a limit ... i.e. can I add this to 4 differant vEdges
Hi,We are using Zscaler cloud service through GRE tunnels and set default route using GRE route under the service vpn(vpn1), which is taken by client traffics on LAN side(service side) when goes to the Internet.The GRE tunnel is established over Inte...
Why are enterprise using SDWAN solution instead of DMVPN or legacy WAN link ?please explain benefits.
Hello All, I've tried to on-board a cEdge using ZTP on-prem, as it should be working on cEdges IOS 17.3.1a & vManage IOS 20.3.1Exact steps are followed using below links https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/sdwan-xe-gs-...
