when do we use weight command in Viptela SDWAN mostly
Forum Posts
If site A has Internet and MPLS link then site A will send traffic to site B by using ECMP principle right ?i.e. here site A will use ECMP in terms of IPSEC tunnel,Right?ECMP is by-default used in Viptela SDWAN right?
Resolved! Service Chaining Question
I have setup service chaining from site 20 vpn 10 to site 101 vpn 20 using vpn 40 at site 10 and vice versa (tested working), but what if there are resources at site 10 that also need to access vpn 20 from vpn 10 via the local firewall. How would I a...
Hello, I am trying to configure my SD-WAN 8500(17.06.04) router via bootstrap USB. However, I couldn't find any information online for specifically the 8000 series for placing the bootstrap file generated from vManage onto a USB correctly. I tried us...
Hi, I am new to Cisco SD-Wan obviously and would like to know if it can replace a common wan topology solution for a site requiring dual ISPs either failover or load-balanced with a public ip range independent of the ISP routing to those addresses as...
Going to be starting an IOS XE SDWAN deployment where the primary WAN connection is cablemodem and secondary is cell for remote sites. With old school routing, we would use EEM to detect when the primary connection was down and admin up the cellular...
Resolved! SD-WAN Color question
I am studying for Cisco SD-WAN exam and sometimes arise some questions that doesn't make sense for me. Take a look at the attached to see the specific question that I need help to get a better explanation.The color is clear for me, but in this contex...
Hello,I am having difficulties completing my TLOC-extension setup on my two IOS-XE devices in a lab. My control connections are up, but my bfd sessions are not coming up. My two routers are connecting to the ISP over the internet links, one on each r...
Resolved! Cisco SDWAN - MPLS Transport
Hi Cisco Community, I'm trying to resolve what is happening on my home lab cisco sdwan.My MPLS Transport is saying "Operation state is DOWN" and true enough NO BFD sessions and TLOC being generated from this interface.My controllers can be reach from...
how to find SLAs configured on Vedge to failover between transport vpn
Resolved! Fortigate and viptela in SDW
Folks: Fortigate can be used as vEdge and viptela as well. Anyone can compare the two kind of device. and relation with vSmart, vBond and vMamager? Thanks
How find App aware routing SLAs in Cisco vedge for failover
How to check drop in QOS in Viptela WAN link through CLI and through Vmanageplease share command and GUI view also
Resolved! Catalyst 8000v enable throughput to 1Gb
Hi guys. I have Catalyst 8000v running software 17.4.2 on sdwan mode and vManage on 20.6.3. I try to enable license throughtput to 1G, but having problem how to enable it, do I have to enable smart licensing using vManage or I can just enable it via ...
Hi Community,I have created a device template that contains the default configuration for our branch SD-WAN routers.Once a new site is deployed I would like to clone this device template so it becomes a new device template for a specific router.We ha...
