Hi,I have an erroneously-installed certificate on vEdge (20.3.1) and I would like to replace it with another one. I thought I would just issue request certificate install <path to the certificate> but it doesn't work. In the output below I'm not even...
Forum Posts
Resolved! Cisco SD-WAN vEdge BFD Status Down
Hello, I have created a SD-WAN lab into VMware WorkStation with the below features :Controllers : vManage, vSmart, vBond in the subnet 192.168.20.0/24,vEdges : Four vEdges cloud respectively in the subnets 192.168.30.0/24, 192.168.50.0/24, 192.168.60...
Hi I am building a small lab on my laptop running ESXi and viptela controllers version 18.4.1. I successfully installed vManage, vSmart, vBond as well as vEdgeCloud (one of each). I used tinyCA to sign certificates for the controllers and uploaded ro...
Sorry for asking such a stupid question but how to save the current config with all its details onto an SSH server?"show running-config" and "show running-config full" give me the same output."show sdwan running-config" doesn't seem to display everyt...
On the Cisco documentation, it is stated that up to 4 collectors can be configured for cflowd. Is it possible to add multiple collectors on different VPNs? https://sdwan-docs.cisco.com/Product_Documentation/Software_Features/SD-WAN_Release_16.3/07Pol...
Dears, Would you be able to inform me if we have already managed to configure option 43 (for WLC pointing) in SDWAN? Previously there was no option available, it was on a roadmap, but without a forecast. Does anyone know if it is already available an...
I see a difference of 13 mins between statcycletime & entry_time. Sometimes it is 23 mins. How can we know the min/max difference between entry_time & statscycletime. What can cause this difference? statistics/approute API Response: {"remote_color"...
Resolved! Does TLOC has to match for IPSEC tunnel?
Hi everybody,Please consider the following example: Above we have:1) Viptela controllers ( not shown ) controlling three vedeges, assume all vedges are allowed to talk to each other. All viptela vedges uses TLOC IP addresses to form IPSEC tunnels,...
vManage - 20.3.2cEdge - 17.3.2I've been trying to add an ingress ACL with Counters on a Sub-Interface and it's not working. Has anyone ran into this? Cisco can replicate the issue and is looking for a workaround.
Resolved! Cisco hosted solution for Vipleta SD WAN
Hi everybody,I have a question where all controllers are hosted by Cisco for Viptela SD WAN .In such case, does customer have access to its vManage, Vsmart, Vbond so he or she can configure desired policies, VPN topologies for the network? Or Cis...
Hello All, In SDWAN, what exactly does color mean? Does it simply indicate the type of transport such as mpls, lte etc. or there is more to it?Do we have use only those pre-defined color in the 'color' command or I can use any color such as pink, yel...
Resolved! vManage SDWAN tunnel-interface
Hi folks, I'm trying to set up the "control-plane" for SD-WAN, meaning the certs and the conns among vManage, vSmart and vBond.I configured the certs with vBond's/vManage's/vSmart's interfaces without the tunnel-interface option on but on the vManage...
Resolved! color/subnet question
Can the IP addresses of two interfaces on the same vEdge but on different colors be on the same subnet/mask?
Hello all, we are running a two transport (MPLS/public internet) SDWAN network and the site interconnection is working perfectly fine. We now wanted to shift from using the proxy that is located in the central datacenter, to use the DIA feature fro...
Trying to use monitoring statistics/approute API and queried for one tunnel. Got following data. What is statcycletime and entry_time? How are the rx_octets, rx_pkts calculated? Is it total number of octets/pkts for 10 min monitoring interval or 30 m...
