SD-WAN and Cloud Networking

Hi, i am setting up an SD WAN over a MPLS backbone. When configuring the OSPF process in vManage it always enables the default information originate even I set it to off. Which results that each Router injects a default route into the MPLS backbone. ...

Hi, I would like to confirm the following regarding viptela web server. Supposed that the purpose of this certificate is to establish a secure connection between your web browser and the vManage server using authentication certificates.Q:What will ha...

Where do we find bug information regarding Viptela vEdge software? I have encountered bug id VIP-40991, and require more information such as workaround and fixed-in-release.

Hi experts, Customer wants to deploy DIA on remote branches with the following needs: To have   1) Public DNS for Internet sites   2) Private DNS for internal applications FQDN based, running  on the overlay at central site Is it possibe to achieve t...

Hello, I am performing my company's POC demo for Viptela. I am stick in installing the Certificate. The operation status is "CSR Submitted For Signing".Seems that I have send the CSR to Symantec but doesn't get response from them. May I know any prer...

I am trying to create in my ASA 5525X a Site to Site VPN tunnel between SiteA (my office) and SiteB (another company office). And to creat ACL and NAT tfor the traffic from SiteA to SiteB.so that users in SiteA can access multiple server in SiteB.Sit...

hi   I want to learn and test viptela sdwan solution in my home lab. can we can lab/demo license for testing/learning purpose.   Regards   Naray

If I configure a remote site to prefer OMP routes from a datacenter A and have a AAR policy to prefer Red TLOC for traffic, which takes precedent in a failure?  The TLOC pref or the OMP pref? i.e. if Red TLOC goes down at datacenter A, would the remo...

Hello If I have broadband circuit ( dynamic IP) directly connected to a Firewall/FTD, Can I have vEdge enabled router behind firewall ?Secondly, on other hand I have separate internet firewall. How I can route SaaS application from LAN segment to go ...

Hi all, Another question regarding SD-WAN as I'm finding it hard to find relevant documentation. Put simply, I want to implement an ACL limiting access to SSH functionality of our devices. We're currently in a PoC and working on getting the overlay a...

TLDR; I have a static route in a service VPN with a vpn 0 gateway. OMP is set to advertise static routes but does not seem to advertise this route. vpn 3001ip route 0.0.0.0/0 vpn 0ompadvertise connectedadvertise staticsh ip route vpn 3001 ...

I have the following questions, but I don’t know if the answer is correct. Please give me some guidance.1、Protect against Wan outages due to a single transport         DA High cost bandwidth  B  Low bandwidth applicationsC Poor or hindered applicatio...

I am using default feature template for the OMPIn the default OMP template, there is option for graceful restart timer value. I want to change the timer value but when i tried to edit & change the default OMP value it is not allowing me to do ? The o...