Hi Everyone, Is a direct link between two PFRv3 DC's absolutely required? I.e. a link not via a BR between the HUB DC and Transport DC. As per this image from one of the online guides. I've found some conflicting info on this so I just wanted ...
Forum Posts
A. We have 450 branch locations currently connected using MPLS links from two different SPs (SP-A & SP-B) B. DC, DR and 13 main branches are connected through both SP-A & SP-B links. (Redundancy & Load Sharing ) C. Other 435 branches are connecte...
Resolved! SD-WAN connectivity to the Internet
From security perspective, would it be OK to connect the SD-WAN appliance directly to the Internet, or should it be connected behind the firewall with a 1 to 1 Static NAT configured?
Resolved! Symantec certificate failed
Hi, I generated CSR for vManage/vSmart/vBond and get certificates signed by Symantec. I installed certificates for vBond/vSmart without any problem, but for vManage I got message Failed to retrieve device data Not able to find any device for CSR co...
What is the solution for ensuring that install base of AIR-CT5520-K9 is active and not inactive/scrapped.?
Hello, Does anyone know how to reset the APIC-EM IWAN configuration? Currently we cannot delete or de-provision our HUB site. In the past, we re-imaged APIC, but we are using EasyQoS and don't want to lose those settings. Thanks
Can anyone kindly advise what are the attributes that can be monitored for Viptela? And How-to? Any screen-shots? Thanks:))
Hello, I'm pretty new to cisco's viptela and I would like to know is there any way to setup a trial lab (for education purposes only)? For edges I guess I may use the newer CSR1000v image, but what about vSmart, vManage and vBond? How about the lic...
Is there a roadmap which identifies a date that has been set for the release of the IOS-XE SD-WAN image on the ISR 4400 (4431, etc.) series routers? The image is already available for download and use on many of the ISR 4300 series routers. Page 1...
Hello All, Do we have some feature on Cisco Viptela SD-WAN so that customer can not move the CPE from one location to another (If they are running ADSL/4G) and still get connected to the overlay ? thanks Harish. Balakrishnan
I want to install the virtual Fortigate firewall and Cisco Viptela SD-Edge to ENCS. Is it official support on install third-part (non-Cisco) virtual Edge to ENCS? My customer is requesting one box on firewall, router, SD-Edge.
Hello Guys, I'm designing a project that has many remote sites (around 900) with most of the possible combination in terms of topologies with the following access configurations: 1internet only, 1 internet + 1 mpls, 1 internet + 1 internet, 1 mpls ...
Hi I am wondering the reason why the physical port which has multi sub-interfaces belongs to VPN0, but the sub-interfaces belong to VPN1?
Within my customer line of business, I manage a total of 9 Cisco routers. EIGRP runs within internal LAN and EIGRP over DMVPNs between the sites. I also run eBGP on 2 of those routers toward the Cloud SP. How would I implement SD-WAN given the wi...
Hello, I am wondering if the recent version of Cisco ISR SD-WAN image support TCP optimization feature which was supported by Viptela platform.
