SD-WAN and Cloud Networking

 After building Controller Profile and adding vEdge (ISR4331)device to a PnP portal I downloaded provisioning file (vEdge devices).  When successfully uploaded provisioning file (no errors) to vManage there are no visible vEdge devices. I receive the...

I have the below routes in my L3 device which is connected behind Cisco SD-WAN router (DC side)The network 192.168.150.0 belongs to the branch network which is learnt as OMP in Cisco SD-WAN router.But on the L3 switch device behind the SD-WAN router ...

HI all,  I'm preparing possible design for SD-WAN for our comapny. Having major question about possible coexistance of cEdge SD-WAN router (ISR 4K router) and internet CE router. It **bleep** possible?  To give more info about our setup, we do not ha...

Hello, I am trying to set up an image download on a ENCS device : ENCS5412/K9; ENCS54_2.6.071220181123 I am trying to download an image from a server via https.The command : system file-download file { source http://myfileserver.lab/myfile.bin }  wor...

Hi,   with viptela architecture, do we need to deploy firewall at the branch or does vEdge comes with firewall functionality?

Hi, im trying to do a simple routing over two vedges, this seems to do not work on version 18.4.0, as i tested it the same config on a Cisco lab running 17.1.1 and working fine.   Its a simple routing of a network via 2 vedges and 1 normal router, to...

We are gearing up the whole SDWAN thing and I am being told the dual DIA circuits need to terminate at the sdwan edge device, but I need to keep my firewalls behind this device for compliance reasons. Well I have always done the NAT at the ASA, so ho...

Hi, im facing the next issue:   We have two branch with 1 mpls + 1 internet link.   Primary branch is publushing default route via BGP to the MPLS link, secondary branch is doing the same but with as-prepend on the default route.   When primary branc...

Got a two part question today...   1. I have seen lots of mention of VPN512 (management VPN) in documentation and presentations, but I have yet to see a practical use demonstrated. Does anyone have thoughts on best practice to use this / are people a...

Team,Which Cisco 4xxx ISR's are supporting the Viptella code? Is the code supported even on the ASR series?Anyone aware about a compatibility guide to move to the new Viptella code? Thanks!!N.

I am close but not quite there. Working to have multiple VLANs accessing each other and also all having access to the internet.  Configuration right now is a single switch connected to a router.  Using 3560 switch and 2911 router for testing.  Ultima...

What is the meaning of CONNECTION STATE = false for "show app cflowd collector" output?     vEdge# show app cflowd collector VPN COLLECTOR IP COLLECTOR CONNECTION IPFIX CONNECTION TEMPLATE DATA ID ADDRESS PORT ...

Have been some up and downs but so far i am impressed with how it is working at cost savings of 40% (after hardware purchase and all that) and everything at the remote branches is faster.Must follow best practice for sure, like 2 different vendors, w...