Hello, everyone. I am studying SD-WAN for my ENCOR exam and I have a question. I understand that TLOCs and TLOC routes in general will contain a color for the transport that the edge router is connected to. My question is, what exactly is the signifi...
Forum Posts
This is maybe more a general router product or platform question than specific SD-Routing/SD-WAN. Let me know if there is a more suitable sub community to post in!OK, so I'm testing out SD-Routing using a Manager and Validator running 20.14.1. I have...
Hello, has anyone encountered this problem? I installed Root CA on vManage 20.9.5.2 and tested it by creating it from vManage, openssl and xca and got the same error. openssl req -x509 -new -nodes -key ROOTCA.key -sha256 -days 730 \> -subj "/C=US/S...
Resolved! How to put vManage back to CLI-mode
I am running 20.9.4.1 in my lab and I know I can rebuild everything, but I came across a quirk and want to get more information/guidance.I have a simple setup, with a single vManage, vSmart, vBond with three vEdges. I got everything stood up and saw...
Resolved! Cisco SDWAN - MPLS Transport
Hi Cisco Community, I'm trying to resolve what is happening on my home lab cisco sdwan.My MPLS Transport is saying "Operation state is DOWN" and true enough NO BFD sessions and TLOC being generated from this interface.My controllers can be reach from...
Has anyone experienced the mean-loss on every TLOC increase simultaneously? The volume of drops in the BE queue is also elevated at the same time. Does anyone know if the BFD packets measuring the SLA get queued under best-effort/DSCP 0? This im...
Suppose Site 4 has a service device (firewall, etc.) to share, and it advertises it as netsvc1 for service insertion. The edge router at this site receives a packet marked for this service. How does this edge device direct the packet to the service d...
Once user access folder in data center then there would not any network issue to open files as user is seeing slowness to open files in folder and customer is connecting to folder after 120 ms delay
Hi All, I'm getting below error while try to generate CSR for vManage, vBond or vSmart in vManage GUI portal. failed to process device request - error type application error tag operation-failed error info SD-WANVersion: 18.4.4 Thanks in advance!!
Hello all When you look at the WAN Edge List there is a column called Tags. I have created some tags and can assign them manually. but I can not find in the documentation on how to assign the tags via API ? anyone an Idea ? Erik
Resolved! Cisco modeling lab free
How can get access to Cisco modeling lab free ?
I try to find how to prevent traffic loss inside overlay.For example last time I had problem inside sdwan tunnel. All my encrypted traffic which went via one of channell with traffic lossing but at the same time sdwan edge didn't see problem via bfd....
In Cisco SD-WAN, I have prefix list say abc_range : 10.100.0.0/16This prefix list is used by many localized policy and also centralized policy.Now I want to add another segment to the prefix list say 10.200.0.0/16 to abc_rangeMy question is can I add...
Hi,I've deployed a LAB with SD-WAN 20.11.1 (vManage,vSmart and vBond are all 20.11.1) - the controllers connected on the same VLAN/Network.when I add vBond and vSmart over the GUI - I see that the communication is working because when I use the CSR o...
Hi, I setup an SDWAN Lab with several c8000v running IOS 17.15.3a running on QEMU 4.1.0 (EVE-NG Lab environment) with 4 vCPU and 8 GB of RAM for each c8000v. CLI on the c8000v was very slow. I have spotted a process called vcode_pkt_PPE0 that consume...
