Hi,Route which is visible in routing table (GET /device/ip/ipRoutes) with protocol omp, isn't visible in omp received routes (GET /device/omp/routes/received). I got response but some routes are missing.When I wan't to get details about OMP route wit...
Forum Posts
Hi Everyone,I'm planning to set up a new HQ site with SDWAN. I chose MX250 for the SDWAN and security services. We have an existing branch that uses ISR 4331, Can I connect the branch site to the new HQ site via SDWAN considering all licenses needed ...
Hello Everyone, I'm a Msc student looking for a research topic in SD-WAN. Please help me in suggesting a topic for my research work.Your suggestions will be highly appreciated.@sdwan@sd-WAN
Software version 19.2.2.I'm following https://codingpackets.com/blog/cisco-sdwan-self-hosted-lab-part-2/ to add vBond and vSmart.I went to vManage > Configuration > Devices > Controllers > Add Controller. Enter vBond's VPN 0 IP and credential. vBon...
The Traffic Monitoring guide (https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/policies/ios-xe-17/policies-book-xe/traffic-flow-monitor.html#concept_wd2_zjm_5pb) states that the IPFIX template has 32-bit ingressoverlaysessionid (1243...
Resolved! sd-wan- hub and spoke topology
Hello,I don't have spoke to spoke communication between the two vedge devices. As per the topology, Vedge3 is HUB and the rest is spoke. vEdge2# show ip routes ompCodes Proto-sub-type:IA -> ospf-intra-area, IE -> ospf-inter-area,E1 -> ospf-external1,...
Hello everyone,I hope I'm posting this in the right category. I bought this router off of ebay in hopes of adding it to my homelab. I powered it on and connected to it via console, and it begins to look like it's starting up. It gets to this point:Mo...
I'm trying to login for the first time to a vManage for some lab testing, setup by someone who has left our organisation.Credentials should be default admin/admin according to the info I have.GUI fails with these credentials, and when I SSH into the...
Hello,Vedge2 device interface g0/0 is directly connected to interface e2/1 MPLS Router. There is no communication between the two devices. there's no MAC address learned by the Vedge device from the MPLS Router e2/1 interface. what could be the reaso...
Resolved! Cisco DNAC, KPI performance question
Good day,I've come today because I would like to use the report of DNAC to present how well my network perform with some KPI performance.What would be the most efficient way to do so, I've try generate some report but they just show basic information...
I had upgrade the SDWAN edge from 17.9.1 to version 17.12.1a. But after i reload the cegde to active new version the sig tunnel can not up seem autotracker not working on sig tunnel. Please advise with me workaround for this issue.
Hello ALL, I would like to seek advise, regarding on my SDWAN. It says that I have a connectivity issue, but per my checking my ISP connectivity to FW is okay. The dedicated public IPof the device is pingable. Also restart the device twice. Thank you...
My customer has power sustainability requirements and he wants to get the power consumption report from each SD-WAN device in the network. what would be the best way to do it? Cisco uses Crosswork Data and NSO to measure power consumption on Nexus 9k...
Hello braintrust! I have a problem that is related to configuring devices in vManage. As far as I can read/understand about the vManage API i should be able to change device-template on a device (effectively changing config) by using the following e...
Hi, I'm running some tests in my lab, on one of the site I'm try to implement a design involving both traditional routing and vEdges : On this pic, right now for the traditional part of the network, only SW3 and R1 are up and running with OSPF (ever...
