Dear Cisco Community,We are currently using Cisco SD-WAN in our environment, and we’ve observed slower-than-expected file transfers between sites. Our WAN links are 1Gbps, and we have Quality of Service (QoS) configured to optimize traffic. However, ...
Forum Posts
Hello guys, Need some understanding about VPN0 vs sub-interfaces design. .. at DC design point of view i have one traditional MPLS link connect directly to the sdwan, and one public internet that i want to pass through FW. i know that is possible to ...
Hi Team, am running SD-wan on my EVE-NG lab. Am running the following devices with the version. Vmanage: 20.6.1.1 vSmart: 20.3.3 vBond: 20.3.3 CSR1000v: 17.03.04a.0.5574 C8000v :17.06.01a.0.298 I have bought the CSR and 8K onto the fabric using ...
Hi, MY sdwan is CDCS means no mgmt control to vBond and vsmart, limited options in vManage global settings. i am trying to configure cloud on ramp for SaaS for custom app. created custom app, defined DIA and Gateway Sites with interfaces. created pol...
In security feature template Replay window size and Extended Anti replay what are best practices ? Should only one be used or both ? What are best practices. We are using normal QOS settings (not per tunnel or per vpn qos). In logging we saw a lot o...
Is it possible to mark a variable as optional in sd-wan cli template?Can we use variables in a local data policy? I want to apply an ACL to internet facing interface that only permits traffic to the internet facing IP only. Policy will be applied to ...
Hello, We have found that the documentation for Catalyst SD WAN / Viptela claims the session log out call changed and requires a different HTTP method, however, in our testing, we have found this is not the case and "post" does not work in most case...
I have a branch with 2 Routers and 2 ISP. I need to forward port 443 from external IPs (1.1.1.1 and 2.2.2.2) to internal Server 10.0.0.10. Internal Server (10.0.0.10) is in Service VPN 10 and have direct internet access with DIA (NAT route to 0.0.0.0...
A given customer site Catalyst SD-WAN Edge uses an MPLS and an Internet tunnel back to a remote site Catalyst SD-WAN Edge. VOIP calls are preferred over the MPLS tunnel by policy. MPLS circuit goes down at Site 1. VOIP calls fail over to the Internet...
I'm seeking Cisco documentation to guide me in creating a traditional IPsec tunnel and an IPsec tunnel with GRE between a Cisco SD-WAN router and a Cisco non-SD-WAN router. Thanks a lot!
Hello I have some basic understanding of Cisco Catalyst SD-WAN, and at work I am now managing a lab/showroom that has Cisco Catalyst SD-WAN as one of the solutions to be demonstraded. However, the design I made is not fully functional, just 1/3 of th...
Hello,"The SD-WAN Viptela spoke has two connections: one for DSL primary and the other for cellular secondary. However, it consistently routes traffic through the cellular connection only. I need to redirect this traffic to the primary DSL connection...
I want to assign forwarding class/QOS Map to application list in Centralized data Policy. I see an option in traffic policy in Centralized Policy-->traffic Policy-->traffic data-->sequence type QOS--match application list and accept forwarding class....
Is it normal that vmanager 20.14 can't downgrade software for routers? [17-Aug-2024 21:06:49 NOVT] Change Partition action submitted for execution [17-Aug-2024 21:06:51 NOVT] Executing device action Change Partition [17-Aug-2024 21:06:51 NOVT] Chec...
I used to do Cloud onramp for IaaS but the Cloud Onramp for Multicloud is new to me... A simple question: does Cloud onramp for Multicloud requires two Catalysit 8000v appliances or I can do Cloud onramp for multicloud with a single Catalyst 8000v li...
