Hi,
in order to attach local control/data policy elemetnt (such as OSPF route policy /BGP route policy /QoS config/ ACl), you first need to attach policy itself. This can be done in device template after creating policy.
It will be just reference point. You still need to attach/add respective policy element in feature templates.
Example, you need to change smth in OSPF on service side. You create OSPF route policy, but you cant apply-attach it directly to OSPF template. After pushing config, you will get error. You need to have local policy where OSPF route policy is imported and this local policy should be in device template of that router. Only after that, you can use that OSPF route policy in OSPF template.
HTH,
HTH,
Please rate and mark as an accepted solution if you have found any of the information provided useful.
