cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
250
Views
1
Helpful
1
Replies

cisco sdwan traffic rule- Loss correction FEC+PKT-DUP

andresvr
Level 1
Level 1

Hi Experts,

I am curious if there is a possibility to create a single traffic rule - data policy that uses both FEC and packet duplication for the same match condition. I was doing some tests and even making 2 rules on the same data policy, one with FEC always and the other  for PKT-DUP (in this sequence order), the packet was only applying FEC not PKT-DUP on all wan links available.

andresvr_0-1708342902865.png

As the policies in vsmart work as an ACL in sequence style, I guess this is the normal behaviour, but i want to verify if there is a possibility to enable both features at the same time for the same service.

BR,

1 Accepted Solution

Accepted Solutions

Hi,

you should choose one of the action per access-list statement/ sequence. You can't have multiple actions.

And indeed, as you mentioned, since policy is evaluated from top to down, duplicate match with different action - has no meaning. Always, first rule is used.

 

HTH,
Please rate and mark as an accepted solution if you have found any of the information provided useful.

View solution in original post

1 Reply 1

Hi,

you should choose one of the action per access-list statement/ sequence. You can't have multiple actions.

And indeed, as you mentioned, since policy is evaluated from top to down, duplicate match with different action - has no meaning. Always, first rule is used.

 

HTH,
Please rate and mark as an accepted solution if you have found any of the information provided useful.