10-22-2019 05:31 PM
Hi Experts
I am trying to set a sort of L2VPN between two vEdges using the Bridge functionality, however i have not had success yet.
I got the bridge interfaces up on both sides , and also each of the laptops MAC addreses are being recognized, but just on the side those are connected to, this is, they are not flooded to the other side and the connectivity among laptops is not achieved.
I am attaching the configuration i set on vMAnage and i wanted to ask for your help in order to know, first, if this is a possible scenario and if so, which part i am missing to configure or missconfiguring
Hope you can help
Thanks in advance
Best Regards
Enrique Agredano
10-23-2019 10:38 PM
What exactly are you trying to achieve ? If the vedges are part of the same overlay, why don't you just allow a normal BFD session between them ?
Or are you trying to connect them somehow back-to-back ?
If you're trying some sort of L2TP-type tunnel, that's not going to work with the vedge, as far as I know.
10-24-2019 12:00 PM
Hi,Stefan
Yes it is a sort of L2TP-type
Regards
10-25-2019 01:41 AM
Then this is not possible with Cisco/Viptela.
Regards,
Stefan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide