03-02-2023 02:47 AM
SD-WAN how to move the vpn 512 eth0 interface to vpn 0
interface vpn 0 interface system af-type ipv4
ip-address 100.1.1.114/32
if-admin-status Up
if-oper-status Up
if-tracker-status NA
interface vpn 512 interface eth0 af-type ipv4
if-admin-status Up
if-oper-status Down
if-tracker-status NA
interface vpn 512 interface ge0/0 af-type ipv4
if-admin-status Up
if-oper-status Down
if-tracker-status NA
interface vpn 65528 interface loopback65528 af-type ipv4
ip-address 192.168.0.2/24
if-admin-status Up
if-oper-status Up
if-tracker-status NA
interface vpn 65530 interface loopback65530 af-type ipv4
ip-address 192.168.0.2/24
if-admin-status Up
if-oper-status Up
if-tracker-status NA
03-08-2023 03:24 AM
Hi,
remote IP address and add new IP address, what is problem?
Regards,
03-09-2023 06:02 AM
Hi
I am not talking about IP address configuration. moving VPN 512 interface to VPN0.
Regards,
03-09-2023 06:57 AM
Hi,
if it is vedge, just use "no interface x/y" command.
HTH,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide