SDWAN routers not accessible over CLI

[avdheshkumar]

Hi Team,

i had a SDWAN lab setup with 1 x ISR1100  and 1 x ISR4331 routers in controllers mode and running in fabric. due to some reason we removed the controllers and missed de-borading the routers.

now the routers are not reachable on network (via LAN) and we are not able to get console access as well.

can anyone suggest a way to recover these routers.

BR

[balaji.bandi · Accepted solution]

You still should able to access the Router IP using SSH and console :

If you like to remove the Router from network then follow below procedure :

https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/sdwan-xe-gs-book/install-upgrade-17-2-later.html#change-console-port-access-after-install--controller-mode

[avdheshkumar]

Thanks Balaji for the reponse, I noticed the status LED is amber and while taking console it shows an error regarding memory and hangs there. raised an RMA for the same.