cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1407
Views
0
Helpful
3
Replies

Viptela vEdge Cloud authentication problem

scjmosclts
Level 1
Level 1

Hi guru! I need help in troubleshooting strange vEdgeCloud authentication problem: When I issue command request activate vedge-cloud the NMS showed the error for corresponded device "Certificate Installation Error". Howether if i repeat the command in CLI (use arrow up + Enter) the device successfuly registered. I lost in my guesses what could be wrong.

1 Accepted Solution

Accepted Solutions

HashamM
Cisco Employee
Cisco Employee

Check if the clocks are synced between the vEdge and the controllers.

 

Also check the certificate status on the vManage for the UUID if there is more detailed error there.

View solution in original post

3 Replies 3

HashamM
Cisco Employee
Cisco Employee

Check if the clocks are synced between the vEdge and the controllers.

 

Also check the certificate status on the vManage for the UUID if there is more detailed error there.

Nothing interesting there. it shows the CSR in plain text

Yes it sound like it was a root cause. Well in fact the root cause was the firewall block ntp sync request and in turn the clock were not synchronized.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: