Hello all,I have a Viptela Vedge 1000. When I select the device on Vmanage , I can see my default route in the running config; however, when I SSH directly to the device, I do not see the default route in the running config. The default route is pres...
Forum Posts
We are setting up a SDWAN with the controllers on prem. We would like to put the vSmart and vManage behind a NAT (not 1:1) using a ISP wan connection (not mpls). The vBond will be placed outside the NAT with a public IP. I know the vBond can act as a...
Here is the scenario.I have multiple private WAN connections providers that do not allow routing our own IP blocks. So the vBond is published (1:1 nat) to these private networks. VBond is also published to internet (1:1 nat). The vManage and vSmart c...
Hi,We have a couple of sites with sd-wan and we need that they stay connected to the corporate network much time as possible in case they lost connectivity with controllers.We have changed the keygen-interval to 2:00:00:00 and the OMP gracefull rest...
I'm having these logs constantly on my router and it's bringing down my network constantly, it's inaccessible for a few seconds then it goes back to communicating alone, has anyone ever gotten an error similar to this *Aug 24 19:26:04.986: %IOSXE-6-P...
Hi All,We are using Viptela 20.6.x. I am currently monitoring via SNMP all our vEdges.I would like to track L7 trackers (new feature 20.6) with SNMP traps. However, I can't find the 20.6 MIBS:https://github.com/cisco/cisco-mibs/tree/main/viptela-mibs...
Ok, so I've got a licensed CML product with Cat8000v nodes and I want to use them as SDWAN edge routers. I go through the initial stages of onboarding and then find I need the Chassis number and Token of a 8000v in a device list in vManage, which I d...
My guestshell would not enable on Linux what’s the cause
Hi Team,I need some information about the behaviour of topology on which we are going to upgrade . Current Scenario ( Fig-1)We are on the legacy network and using Nexus as an Edge device. Our WAN links are terminated on the nexus. All the traffic fro...
Dear Experts,While doing redistribution from OMP to OSPF, cant we set the type E1 and associated values?
Hello All, Good Day to You !!Hope you are doing well !!Looking for your support and suggestion on the below Query: I have 2 Nexus devices on which 2 WAN links are terminated from different ISPs and LAN prefixes are received from the other multiple si...
Hello I am reaching out from an Amazon site about getting some rail kits for C8500L-8S4X. We did not get the rail mounting kit in out box. Looking for some assistance in this matter
I've pushed some device templates to some devices but status of two of them has been changed to "Device Out of Sync - Failed to attached template". I rolled back my configurations but the status of these devices are still Out of Sync. what should i d...
Hi , I have a multi HUB SD WAN network . In GUI you can enter the monitor network and on real time test on demand remote but it has no details. Is there a command in CLI or other GUI option which will tell me how many site are working with each HUB ?...
Hi everyone.I have one vManage (20.7.1) in standalone mode in my eve-ng. Yesterday I had an eletric power disruption at home and my vManage seems to have died. I can telnet to 8443 from my desktop. But I've tried to wget through vMware console and I ...
