cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Choose one of the topics below for SD-WAN Resources to help you on your journey with SD-WAN

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC!
We will not comment or assist with your TAC case in these forums.

116
Views
0
Helpful
0
Replies

Meraki MS225 - Inter VLAN connectivity

Hi everyone

 

I'm having an issue whereby my clients connected to a Meraki MS225 switch (via MR42 AP) are unable to connect to a local printer.

 

This is the scenario

 

VLAN 100 - 10.10.10.0 /24

VLAN 900 - 192.168.100.0 /24

Local printer - 192.168.100.5

 

VLAN 900 is effectively the guest network and this LAN requires printing facilities but is not allowed to use the printer on VLAN 100. VLAN 900 users connect to the Guest SSID and pick up an IP address from Meraki DHCP (NAT mode). They receive 10.*.*.* address and have full Internet access. The only problem is the printer.

 

The printer in VLAN 900 has a static IP address of 192.168.100.5. I've added a rule on the firewall allowing access from VLAN 900 to this IP address but still VLAN 900 users are unable to print.

 

Physical connections:

AP connected to switchport 11

Switchport 11 configured trunk port native VLAN 100 - allowed vlans ALL

Printer connected to switchport 10 - trunk port native VLAN 900 - allowed vlans ALL

 

What am I doing wrong? I'd really appreciate any assistance.

 

Many thanks

Everyone's tags (1)
CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards