FC4210 and SMC2210 10G interface

[p]

We a have provide Cisco Stealthwatch X710-DA2 dual-port 10G SFP+ NIC on FC4210 and SMC2210 10G interface. 

So Can we used 10G SFP+ Port for Management and Collection 

[kyoshiik]

Data receive port and management port are different.

Please check the below datasheet that explains port configuration with the picture.

FC4210:

https://www.cisco.com/c/dam/en/us/td/docs/security/stealthwatch/m5/hw/SW_FC_4210_Spec_Sheet_DV_1_1.pdf

SMC2210:

https://www.cisco.com/c/dam/en/us/td/docs/security/stealthwatch/m5/hw/SW_SMC_2210_Spec_Sheet_DV_1_1.pdf

[p]

It is Port 3 and Port 4 for FC4210It

and Port 3 For SMC2210

[kyoshiik]

Yes, that's correct. Apologies, my previous answer is not clear, I mean physical port location is fixed so we can use port3 for management and collection, and port4 for additional collection but we can't use port4 for management in FC4210. SMC2210 is the same, we can only use port3 for both management and collection but we can't use port4 for these functions.