We're pleased to announce that AnyConnect is macOS High Sierra (10.13) compatible.
Our recommended version for High Sierra is 4.5MR2 (4.5.02033), available today 9/25/17. This version includes additional guidance to ensure that the AnyConnect Kernel Extension (KEXT) is properly approved by the end user. This is a new requirement in High Sierra.
4.4MR4 and 4.5MR1 have also been tested for High Sierra compatibility, but will provide no further guidance to the end user (beyond the single OS prompt) that manual steps are required to provide full AnyConnect capabilities. Additionally, with these older (compatible) AnyConnect releases, a reboot may be required after manually approving the AnyConnect extension to continue to run. This step is not required with 4.5MR2.
Note: Customers using Host Scan must be running version 4.3.5038 or later of the module in order to detect the presence of the macOS 10.13 firewall.
We will continue to look at any way we can optimize this experience in subsequent maintenance releases.
Hi,Is anyone know when will Cisco release a new update to support iOS 13.0 beta and Catalina 10.15? My client (International School) upgraded their personal devices to the latest version and now they were not able to connect in BYOD.Hope Cisco d...
Hi All, Do you know if there is a way to redistribute EIGRP into BGP in Firepower FTD?I configured EIGRP, BGP and redist BGP into EIGRP.But couldn't find a way to redist EIGRP into BGP. Regards, Umut Yasar
What are some good tools or ways to monitor network changes on cisco routers and switches in a medium sized business? Preferably tools that will allow a network administrator to go in and see if any changes were made in the router or switch configura...
Good day - Does anyone know if CTS can be used without ISE (a citation would certainly be helpful!)?If I configure TrustSec static policies (via cts manual) and manually define role-based policies (via cts role-based permission...), and then manually...
I'm building multiple IPSec VPNs over cellular networks using a Cradlepoint IBR650 on either end. On the head end is the 867VAE-K9 behind one of these Cradlepoints terminating one end of every tunnel and each other end is another Cradlepoint termina...