After activating closed mode, I found these devices not working. They are all Cisco IP phones. Avaya Phones seems to be working fine under same port config. Sh auth br showing all these authenticated (AZ).
Is there any workaround for this or have anyone encountered this kind of issue?
Hello,we use an FMC (vmware Version 126.96.36.199).I've noticed that sda7 (/var) has consistently high read rates. Between 250 and 300 MB/s. Is that normal? Which process is responsible for this and how can I determine which process it is?Thanks for the helpRon...
Hi. I'm the network admin for my organization and we've been having some security issues on our network recently so I'm trying to investigate using wireshark. But my issue is that wireshark only captures packets that come to my device's network inter...
Cisco Router 2911, there are two problems:1. SSL from outside not working. From outside I mean to access router on WAN Port from my home. 2. Ping Router WAN Port from outside i.e. from my home. Complete configuration is as follows, please ...
Hello Guys, I am using cisco 2802 AP as WLC and using ISE for AAA. Clients should be authenticate by using EAP-TLS. I am getting these errors: 5411 Supplicant stopped responding to ISE 12931 Supplicant stopped responding to ISE af...
Hi, my Customer has some strange behaviors on his Switches with some clients.First the config (Closed Mode): aaa group server radius ISE
server name cisco-nac01
server name cisco-nac02
aaa authentication dot1x default group ISE