How to integrate cisco ise 2.6 tacacs authentication with forcepoint？

[Hung_lin]

Unable to integrate cisco ise 2.6 tacacs authentication with forcepoint, it will be rejected

[balaji.bandi]

I have not deployed or tested your device, but i do have other 3rd party using radius authentication with ISE / ACS.

As per your message you are trying to use radius authentication using ISE with LDAP ?

here for your product :

https://help.stonesoft.com/onlinehelp/StoneGate/SMC/6.3.0/GUID-26D7F914-2335-4D52-BE07-869BD6D165FD.html

example guide :

https://community.cisco.com/t5/security-documents/ise-device-administration-using-tacacs-and-radius/ta-p/3621655

[Hung_lin]

Currently forcepoint integration ise uses radius token for identification, but the log shows as follows

[Arne Bier]

Looks like the user account was not found in AD. Have you performed a manual lookup in ISE to see whether you can authenticate that user in AD? Go to External Identity Sources, select the AD Join Point and then select one of the ISE nodes, click Test user and give it a go.