Install the appropiate Pointed patch available for the current ACS version.
For 5.3 --> Pointed-PreUpgrade-CSCum04132-5-3-0-40.tar.gpg
For 5.4 --> Pointed-PreUpgrade-CSCum04132-5-4-0-46-0a.tar.gpg
Install the 5.5 upgrade package: ACS_22.214.171.124.tar.gz
Install the cumulative 5.5 patch: 5-5-0-46-1.tar.gpg
To upgrade from ACS 5.4 to 5.5 patch-1, it is important to run the command "database-compress" prior to installing the Pointed Patch.
Note: In case of a Distributed deployment scenario, please deregister the secondary from the primary before the upgrade. Once both appliances run 5.5, including the cumulatve patch, register the secondary again.
I have the following setting at the Switch port.ip access-group ACL_DEFAULT inauthentication event fail action next-methodauthentication event server dead action authorize vlan 100authentication event server dead action authorize voiceauthentication event...
Hi, We have the following setup: MPLS switch--Cisco FTD--Switch Cisco FTD is configured in high availability mode. The primary FTD is connected to the primary MPLS switch and the standby FTD to the standby MPLS switch. Recently, the ftd fai...
Hi,I'm confusing about ISE pxGrid and TC-NAC.Are they the same function?Or are they different ?Can you guys help me to understand what is pxGid and when to use it .And also what is TC-NAC and when we need to use it?Thank you so much!
Hi. I have a cisco ASA 5506-k9 and trying to configure IPsec VTI on it and tried inputting command of interface tunnel 10 in global configuration mode, but an error accrues saying "ERROR: % Invalid input detected at '^' marker". so I used ? after int...
Earlier this year, we purchased some ASAv virtual appliances with an SWSS service contract. The service contract lists the instance number in place of the serial number on CCW-R. The serial numbers on the VMs are not associated with a Service ...